Growpros
White Female WP RJ45 8p8c to Male RJ45 8p8c Data Adapter
White Female WP RJ45 8p8c to Male RJ45 8p8c Data Adapter
92 in stock
Couldn't load pickup availability
Payment options
Grow Pros Solutions has upgraded to using Waterproof RJ45 cables for lighting data control. The screw style end cap on our WP RJ45 data connections seals the data connections from moisture that corrodes the data pin connections and lead to failed data signals. The era of traditional 4pin RJ12 non-waterproof data connections that have been used in indoor Agriculture with dual ended HPS and older LEDs has come to end. No more need to gum connections with dielectric grease or spend hours troubleshooting to find the one faulty data cord or splitter.
Our Data Adapters are color coded for your convenience.
Please read each description to make sure you select the correct adapter. Feel free to reach out to our tech support.
FEATURES & BENEFITS
- Only 1 adapter required per controller/room.
- The male RJ45 connector receives the RS485 output signals from the Dim Out RJ45 on our controller. The adapter converts this signal into (4) analog 0-10v dimming signals – request Pin Outs for specific Grow Pros Solutions lights or controller from chuck@wegrowpros.com.
- The dual RJ45 female ports use a Waterproof interface to ensure a firm and reliable connection, reducing the risk of accidental disconnection in active installations.
- Duplicates one multi-channel control signal into two identical outputs, allowing multiple devices to receive the same command from a single controller.
- Gold-plated contact pins enhance long-term contact reliability and help maintain consistent signal transmission in low-voltage control applications.
- A sealed design at the ports helps protect connections in environments where humidity or moisture may be present.
- Use WP RJ45 cables and GPS 4 Way RJ45 Data Splitter to connect multiple rows of lights together to connect to the adapter.
- Designed for GPS Controllers – use to control Dual Channel or Quad Channel Grow Pros Solutions lights.
- (Note – GPS White controller and White Adapter will sync CH1 and CH2 timing and dimming settings of simultaneously if attempting to run multiple spectrum controlled GPS lights with one controller – example CH1 UVA on Chameleon top light and CH1 Full Spec 80% DR on UCL4 will link together, and CH2 Full Spectrum on Chameleon top light and CH2 Independent 730nm Far Red on UCL4 will link together. ) Call Chuck at (323) 621-6850 as we may be able to figure out some splices to accomplish your exact goal.
- Can be used with GPS White Controller and GPS Single Channel Lights (not recommended).
- Fast Delivery
- Easy Returns
- Secure Checkout
Share
INFORMATION QUESTIONS
FREQUENTLY ASKED QUESTIONS
What is Hydroponics?
Hydroponics is the science of growing plants without soil. The plants thrive on the nutrient-water solution alone. The growing medium merely acts as a support for the plants and their root systems while the solution passes freely. The growing medium, if any, is totally inert.
What types of plants grow best hydroponically?
Anything can be grown hydroponically, but some plants prove to be more space efficient. Some plants we suggest are tomatoes, sweet peppers, hot chilies, lettuce, spinach, squash, cucumbers, broccoli, beans, snow peas, herbs and flowers of all types.
Can you REALLY get better yields/quicker growth?
Absolutely. The plants, when receiving everything they need, tend to be healthier, faster growing and generally more productive. You can expect 30% faster growth with many crops.
What are the watering cycle timelines hydroponic systems?
Once the reservoir is filled with nutrients, it is time to put your hydro system to work! The ease of hydroponics is automation – automation is achieved by putting the pump on a timer according to your watering needs. The watering cycle depends on growth stage, growing medium and hydroponic system. In an ebb and flow or drip system with rockwool as the medium, seedlings, clones and plants in the early vegetative stage require watering only once a day for 15-30 minutes (twice a day for higher temps). Mature, flowering and fruiting plants require a heavier feed and can be fed once a day for 30 minutes (twice a day for higher temps). Typically soiless mixes and coco fiber can be watered for about 15 minutes twice a day, and can be adjusted for heavier feeding during the flowering and fruiting stage or higher temps. ViaStone, Hydroton, Grow Rocks, and Silicate mediums need to be watered more frequently – a constant drip for drip systems, and about 15-30 minutes every 3 hours for ebb and flow systems and can be adjusted for heavier feeding during the flowering and fruiting stage or higher temps. Aeroponic systems require frequent watering cycles; 30-60 seconds every few minutes or a constant spray.
What do I need to test pH? How do I test pH?
pH has a range from 0 (acidic) – 14 (alkaline), with 7 being neutral. A proper hydroponic pH range is between 5.5 to 6.2 for most hydroponic crops. For specific crop pH, check out our Plant Guide. pH must remain within the proper range for good plant health, disease resistance, and proper nutrient uptake. pH is maintained by adding pH Up and pH Down to the nutrient solution. For more information, see the Testssection of our site.
How will the flavor compare to my outdoor grown, organic produce?
The taste may be even better! This is simply due to the fact that the hydroponically grown plants are getting everything they need, when they need it. Don’t be fooled by “hot house” produce grown commercially. The grower’s primary concern is shipability and storage, not flavor. When you grow your own vegetables at home, you can expect nothing less than excellent results. Plus, hydroponically grown produce has the added benefit of a longer shelf life.