How to use Root Riot cubes

How to Use Root Riot Cubes: Skip the Soak, Do the Squeeze Test

Most Root Riot problems we hear about start with one habit carried over from rockwool: the grower drops a fresh bag of cubes into a tub of pH-adjusted water "to be safe." Root Riot does not need that. The cubes ship wet and already pH balanced, and the extra water is usually what turns a tray of cuttings into mush by day five.

Short answer: use Root Riot cubes straight from the bag or tray. Squeeze one; if moisture just reaches the surface, it is ready. Dip the cutting in rooting gel, set it in the pre-formed hole only as deep as it needs to stand up, cover the tray, and leave it alone. Expect roots in about 7 to 10 days, sometimes two weeks or more. Transplant when roots show through the sides, with the cube buried just below the surface. For seeds, one seed per hole, cover it with a pinch of the cube, and keep it warm.

This guide covers the steps in order, a day-by-day timeline for cuttings, seed starting, transplanting, and whether the tray and cubes can be reused. If you want the general cloning method (picking a mother, where to cut, rooting environment), start with our step-by-step guide to cloning cannabis. This one is about the cube.

What a Root Riot cube is (and why it changes the prep)

Root Riot comes from Growth Technology, the same company that developed Clonex Rooting Gel, and Hydrodynamics International distributes both in the US. The maker describes it as a peat-based cube at the industry-standard 36 mm size with a stable pH of 6.0, held together with a bio-based binder and inoculated with macro and trace elements. Hydrodynamics says the cubes are supplied already moist and work for both cuttings and seeds.

That is the key difference from stonewool, where a pre-soak and pH adjustment before sticking is standard practice. Root Riot arrives at working moisture and working pH, so the prep step is a check, not a soak. If you are still choosing between media, our comparison of Root Riot, Rapid Rooter and Grodan plugs by cost per cube covers the price side.

Do you soak Root Riot cubes? Use the squeeze test instead

No, not out of a fresh bag. The Hydrodynamics Clonex guide says the cubes are pH balanced and pre-moistened, so they are ready to use right out of the bag or in the tray.

Before you stick anything, squeeze one cube between two fingers. Hydrodynamics gives the target: the cube should feel spongy and moist, not saturated, and moisture should just come to the surface when squeezed. Three outcomes:

  • A bead of water appears at the surface and stops. Ready. Do nothing.
  • Water runs out. Too wet. Let the tray sit uncovered for a few hours, or gently squeeze excess out of each cube, then test again.
  • Nothing comes out and the cube feels firm. Too dry. This happens with a bag left open or stored warm. Hydrodynamics says to re-wet dry cubes in a bowl of lukewarm water, ideally at room temperature, then drain well.

What to re-wet with

Plain water works. If you want a light feed at the same time, the Clonex guide suggests re-wetting the cubes with Clonex Clone Solution diluted in water, while taking care not to oversaturate them, since that can suffocate the clone. The label rate is 20 ml of Clone Solution per gallon of water, or 5 ml per quart, used with each irrigation, with adequate drainage. A quart (about 946 ml) at that rate makes roughly 47 gallons of solution, far more than a few trays will use.

On pH: the cube is already at 6.0 by the maker's spec, so there is no conditioning step. If your tap water runs high or low, adjusting the re-wet water is reasonable practice, but it is not a required step the way it is with rockwool.

How to use Root Riot cubes for cuttings, step by step

  1. Set up the tray first. Pull the packaging off a ready-made tray, or set loose cubes into an empty cell tray. Do the squeeze test now, before you cut anything, so cuttings are not sitting in the air while you fix moisture.
  2. Pour a small amount of gel. The Clonex guide says to pour only the gel you need into a shot glass and reseal the container, and to never pour unused gel back into the bottle, to avoid contamination.
  3. Take the cutting. Hydrodynamics' Root Riot directions say to cut diagonally just below a node or stem swelling and remove all but a couple of leaves.
  4. Dip. Coat the cut end so the entire cut area and the surrounding stem are covered by the gel.
  5. Insert, do not force. This is the depth question. The answer from the manufacturer is: do not force the cutting in; insert it just far enough to support it. In practice that is often a third to half the cube depth. If a thick stem will not fit, the guide says you can expand the hole with a sanitized tool. Jamming a stem in crushes the cut end and squeezes the gel off.
  6. Mist and cover. Mist the cuttings, then cover the tray with a clear dome or bag to hold humidity. Keep leaves off the plastic: the guide warns against leaves pressed against the dome walls or stuck between the dome and the tray.
  7. Light. Low and long. The University of Connecticut's hemp production notes call for supplemental lighting at 18 hours per day from the time cuttings are stuck. A propagation fixture or a dimmed LED well above the dome is plenty; this is not the stage for full veg intensity.

Using Clonex Rooting Gel by the label

Clonex Rooting Gel is registered with the EPA and approved for use on all crops, and Hydrofarm lists it under EPA registration number 79664-1-AA. Hydrodynamics describes it as a water-based gel that stays in contact around the stem and seals the cut tissue. The label directions are short: dip the cutting to the desired depth, insert it into the rooting medium, mist, and place it in a warm, clean, moist, humid environment. The same label states that it is harmful if swallowed or absorbed through the skin, and should be stored only in the original container in a cool, dry place, so wear gloves and wash up after. Follow the label on your bottle; that is the legal standard for an EPA-registered product, and we do not suggest any use beyond it.

Does a rooting hormone matter that much? In a peer-reviewed study of hemp cuttings published in PLoS ONE, hormone treatments substantially improved rooting over no hormone, while differences among the hormone products and concentrations tested were not significant. That study did not test Clonex or Root Riot specifically, so read it as "use a hormone," not as a ranking of brands.

How long do clones take to root in Root Riot? A day-by-day timeline

The manufacturer's guide puts it at 7 to 10 days for most plants, with some taking 2 weeks or longer. UConn's notes put cuttings ready for transplant in 2 to 3 weeks. Here is what that window looks like from the tray, and what to do at each point. Treat the days as typical, not fixed; strain, cutting quality and temperature move them.

Day What you will usually see What to do
0 Fresh cuttings, upright, cubes passing the squeeze test Mist, dome on, lights on an 18 hour schedule
1 to 3 Some droop is normal as the cutting adjusts Leave the dome closed. Do not water. Check that leaves are not touching the plastic
3 to 5 Leaves perk back up; lower leaves may yellow slightly Squeeze-test one cube. Mist if the cuttings look dry; Hydrodynamics suggests Clonex Mist about every other day
5 to 7 Cuttings stand firm; first white root tips may show at the cube sides or bottom Start cracking the dome vent for a few hours a day
7 to 10 Roots visible on most cubes Open the vents further. Re-wet only if a cube fails the squeeze test
10 to 14 Late cuttings catch up; roots wrap the cube on early ones Transplant the rooted ones. Leave the rest covered
14 to 21 Stragglers either root or start to fail Pull anything soft or dark at the stem; see the troubleshooting guide below

The misting note comes from the Clonex guide, which says to spray cuttings with Clonex Mist about every other day so they don't dry out. Plain water in a clean sprayer does the basic job too.

If you are past two weeks with green, healthy cuttings and no roots, the usual cause is cold. If the stems are going soft, it is usually water. Our guide to why cannabis clones aren't rooting walks through each failure pattern.

Starting seeds in Root Riot cubes

The same cubes work for seeds, with a few changes:

Seeds that go straight into a cube skip the paper-towel transfer, which removes one handling step where a taproot can break. If you want to compare germination methods, our guide to germinating cannabis seeds ranks them.

When and how to transplant out of Root Riot

The signal is simple. Hydrodynamics says the new plant is ready to transplant when roots are visible, and the cubes can then go into any growing system. You do not need to wait for a full root ball; white tips through the sides or bottom of the cube are enough.

To transplant into soil or soilless mix, the Clonex guide says to fill a cup halfway, set the clone in the center, and fill around it, packing just over the top of the starter cube, firm enough that the plant will not tip. Do not peel the cube off; roots grow through it. For coco, the cube sits in the same way. For hydro, set the cube in a net pot with clay pebbles around it so it stays above the water line.

For the first feeds after transplant, go light. The guide says to water rooted clones with Clonex Clone Solution, because a regular grow nutrient formula can burn the plant at this transitional stage. A week or so in the new container, then step into your normal veg feed.

Can you reuse the tray? Can you reuse the cubes?

The tray, yes. A plastic cell tray (and dome, if you use one) will last many cycles if you clean it. University of Minnesota Extension recommends that you sterilize used pots and trays by soaking them for 30 minutes in a 10% household bleach solution. Rinse well and let them dry before the next round.

The cubes, no. A cube that held a failed cutting may carry whatever rotted it. The same UMN page says use new potting mix to fill trays and do not reuse potting mix. At 15 to 20 cents a cube, a fresh one is cheap insurance.

Storing unused cubes. Hydrodynamics says to keep unused cubes in their plastic bag to prevent drying, stored in a dark, cool area. Roll the bag closed and clip it. A bag left open on a warm shelf is how you end up with dry cubes.

Which pack to buy

Hydrodynamics lists Root Riot as a 50-count tray, 50- and 100-count bags, and a 1,500-count bulk case. Here is how the sizes we carry sort out, prices as of November 17, 2026:

Root Riot is one good option, not the only one. Rapid Rooter plugs and stonewool cubes root cuttings well too, and the cheapest cube per unit on our shelf is stonewool. The reason to pick Root Riot is the handling: no soak, no pH conditioning, and a cube that tolerates a beginner's watering better than rockwool does.

Frequently asked questions

Do you soak Root Riot cubes before use?

No. They ship pre-moistened and pH balanced, ready to use from the bag or tray. Squeeze one: if moisture just comes to the surface, it is ready. Only re-wet cubes that have dried out, in lukewarm water, then drain.

Do you need to pH Root Riot cubes?

No conditioning step is needed. Growth Technology specifies a stable pH of 6.0. If you re-wet dry cubes, using water in your normal range is fine, but you do not need to soak them in pH-adjusted water the way you would with rockwool.

How deep do you put a clone in a Root Riot cube?

Only as deep as it needs to stand up. The manufacturer says not to force the cutting and to insert it just far enough to support it, often a third to half the cube depth. Widen the hole with a sanitized tool if the stem is thick.

How long do clones take to root in Root Riot?

Hydrodynamics says most plants root in 7 to 10 days, with some taking 2 weeks or longer. Transplant once roots are visible through the cube, which is typically 10 to 21 days after sticking.

Can you start seeds in Root Riot cubes?

Yes. Place one seed in the hole, cover it with a small piece torn from the cube, keep the tray near 25°C (77°F), and give 18 hours of light per day once the seedling emerges. Keep the cube moist but not waterlogged.

Can you use Root Riot cubes in hydroponics?

Yes. The manufacturer says rooted cubes can go into any growing system. Set the cube in a net pot surrounded by clay pebbles so it stays above the water line.

Can you reuse Root Riot cubes or the tray?

Reuse the tray after a 30-minute soak in a 10% household bleach solution, rinsed and dried. Do not reuse the cubes; extension guidance is to start with fresh media to avoid carrying disease into the next batch.

Related guides from Modern Farms

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.